The Plasticade products
are very durable 100% plastic products that will not rust, splinter,
or ever need painting and this is a great place to get them at very
reasonable prices.
The molded handle provides easy portability. These stands can be
internally weighted down with sand. The hinges "click-lock" into
position. Vinyl graphics can be applied directly to the sign area of
the sign stand or sign faces can be attached with Velcro, double
stick tape, rivets, or the optional Screw-in hardware. allows for
changeable sign faces.
There are two important things to know before using any of these
Plasticade sign stands. One is how much sand to use when adding
internal weight to the stand (if needed). You should only put 5 lbs
(or about a coffee can full) in each side. That comes to about 6
inches in the bottom of each side. You do NOT want to fill them up
all the way to the top with sand or they will bend.
The second thing is that you will need to wipe the surface with
isopropyl alcohol if you are applying adhesive backed vinyl directly
to the sign area or it will not stick. You do not need to use
isopropyl alcohol if you are attaching a completed sign to the sign
area of the sign stand.
